|Description||Maximize the 400lbs lifting capacity of The Lift 400 with a Double Trolley Connector (DTC) kit. Works with your 2″ hitch receiver bike racks for raising and storing up to 6 bikes depending on the combined weight of the bikes and the bike rack.
The DTC kit will allow you to raise up to 400lbs on a single trolley as long as the center of the weight is withing 36in from the wall. This can also be used with the Cargo Rack, the Roof Rack, and the future Tire Rack to increase the lifting capacity of a single attachment.
DTC is recommended for use with larger, heavier racks weighing an average of 50lbs or more.
|The Trolley is custom designed to work directly with The Lift by Top Shelf. The trolley and the welded 2in hitch receiver are made from structural steel with stainless steel, sealed wheels. The trolley is powder coated to provide long lasting durability.|
|Content||The Double Hitch Connector (DHC) Kit was designed to enable The Lift to raise up to 400lbs with one 2in hitch receiver attachment utilizing two Trolleys. The DHC Kit consists of the DHC and an additional Trolley that works in conjunction with the original Trolley that comes with each Lift. The DHC allows the Lift to raise and store, among other things, bike racks designed to transport up to six (6) bikes along with the bikes. The combined weight of the bike rack and the bikes should not exceed 400lbs and the center of the weight cannot be further than 36in from the wall. The DHC can also be utilized to raise and store larger items from a 2in square tube such as Jeep toppers.
If you own a Kuat, Thule or Yakima bike carrier, tray or platform style, designed to transport four (4) bikes, and these four bikes average 50 pounds or more, then you should also utilize the DHC kit to support the large load.
- Weight: 25 lbs (Connector plus an additional Trolley
- Coating: Powder Coated (Black)
- 2in Hitch Receiver
- Weight Capacity: 400lbs up to 36in from the wall
- Not for vehicle use.
|Sized for Roof Rack (65in x 38in)||The double trolley cable connects a second trolley to the original trolley that comes with The Lift within the same channel. The standard cable is 24in in length and has a durable nylon coating to protect the cable from fraying. Each end of the cable has a swaged fork end with the 1/4in pins included with each end.||Our Lift design utilizes the most common base Unistrut profile on the market. Often referred to as standard Unistrut, senior strut, or 1-5/8" Strut; the channel has the correct sized holes located in the proper locations to best support the Lift.
There is a $50.00 shipping surcharge due to the oversized length of the channel. This will need to ship Limited Truck Load (LTL) therefore, it will arrive separately from the Lift shipment. ||The Trolley is custom designed to work directly with The Lift by Top Shelf. The trolley and the welded 2in hitch receiver are made from structural steel with stainless steel, sealed wheels. The trolley is powder coated to provide long lasting durability. The lifting capacity of the Trolley in conjunction with the Lift is limited to 300lbs when the load is centered 24in or less from the base of the Trolley.|