Content | The double trolley kit includes the Trolley specifically designed for the Lift along with a 24in cable with swaged wire cable fork connectors on each end. The connector cable is used to connect two trolleys together to allow for lifting two hitch receiver attachments at one time. The total lifting capacity of the Lift is limited to the lifting capacity of the Lift model and each Trolley has a 300lb lifting limit with the combined loads not to exceed the lifting capacity of the Lift. | Custom length Double Trolley cable | Our Lift design utilizes the most common base Unistrut profile on the market. Often referred to as standard Unistrut, senior strut, or 1-5/8" Strut; the channel has the correct sized holes located in the proper locations to best support the Lift. | Our Lift design utilizes the most common base Unistrut profile on the market. Often referred to as standard Unistrut, senior strut, or 1-5/8" Strut; the channel has the correct sized holes located in the proper locations to best support the Lift.
There is a $50.00 shipping surcharge due to the oversized length of the channel. This will need to ship Limited Truck Load (LTL) therefore, it will arrive separately from the Lift shipment. | The double trolley cable connects a second trolley to the original trolley that comes with The Lift within the same channel. The standard cable is 24in in length and has a durable nylon coating to protect the cable from fraying. Each end of the cable has a swaged fork end with the 1/4in pins included with each end. | |
Additional information |
Weight |
9 lbs |
Dimensions |
14 × 9 × 4 in |
|
Weight |
2 lbs |
Dimensions |
4 × 4 × 1 in |
|
Weight |
12 lbs |
Dimensions |
94 × 3 × 3 in |
|
Weight |
15 lbs |
Dimensions |
118 × 3 × 3 in |
|
Weight |
1 lbs |
Dimensions |
4 × 1 × 1 in |
|
|